Front brake pads and discs
1991 U.S. 325i coupe, M20, rear-wheel drive. Factory ventilated front discs and matching sliding calipers; iX hardware differs.
Tools
- Counterhold wrench on the guide pin. Check the hex on the fitted caliper.
- Disc micrometer, caliper hanger, rated stands and torque wrench.
Tightening & service specifications
- Front disc retaining screw
- 16 NmBMW E30 torque manual · 34-1 · PDF 136
- Front caliper carrier to steering knuckle
- 123 NmRear-wheel-drive E30 row; BMW specifies lightly oiled bolt threads.BMW E30 torque manual · 34-1 · PDF 136
- Front guide-pin bolts
- 35 NmRenew the bolts for this E30 design.BMW E30 torque manual · 34-1 · PDF 136
BMW catalog parts
- Ventilated front disc, 260 × 22 mm · 34 11 1 160 915
- Catalog-listed front disc alternative, 260 × 22 mm · 34 11 6 752 352
- Front brake pad set · 34 11 1 162 481Confirm the fitted caliper from the front pad diagram.
- Front brake wear sensor · 34 35 1 153 966Inspect and replace if worn through or damaged.