BMW E30 TECHNICAL REFERENCEService manual
Source library
Repair walkthroughs
WORKSHOP GUIDE / BRAKES

Replace the rear-disc parking brake shoes

E30 325i with the original rear disc and internal parking-brake shoes.

AdvancedReplacement steps1–2 hr per axleSOURCE-BASED GUIDESource references recorded · technical review pending

Replace the rear-disc parking brake shoes

E30 325i with the original rear disc and internal parking-brake shoes.

Tools

  • BMW 34 4 000 spring-retainer tool. Use the rear brake procedure for the 7 mm hex guide bolts, caliper hanger and rotor fasteners.

Tightening & service specifications

Rear disc retaining screw
16 NmBMW E30 torque manual · 34-2 · PDF 137
Original rear 7 mm guide bolts
30 Nm, −5 Nm toleranceBMW E30 torque manual · 34-2 · PDF 137

BMW catalog parts

1991 325i coupe · parking brake shoe diagram

Replacement steps

Before you start

E30 325i with the original rear disc and internal parking-brake shoes.

Estimated time
1–2 hr per axlePlanning estimate for stock hardware in serviceable condition.
Review
Source-based draft · technical review pending

Listed tools & supplies

  • BMW 34 4 000 spring-retainer tool. Use the rear brake procedure for the 7 mm hex guide bolts, caliper hanger and rotor fasteners.

Check sizes and special fixtures for the installed hardware.

Required parts

  • Matched parking brake shoes for both rear rotors. Replace damaged retainers, springs or adjusters.

Manual references

34-17 · 34 41 200

Use these page numbers in your copy of the manual.

Process pictures are not indexed for this guide. Use the cited manual’s figures alongside the steps.

Read before working

  • Chock the wheels and use a rated lift or stands. Keep the removed assembly supported separately.
  • Avoid inhaling brake dust. Keep friction surfaces clean and verify the brake works before road use.

Walkthrough

Expose the shoe hardware

Release the cables and remove both rear brake discs using the rear brake guide. Support the calipers independently of the hoses. Compare the drum surfaces and shoe layout before removing anything.

Check: The rotor hats are serviceable and both sets of hardware can be compared.

Replace and orient the shoes

Unhook the return springs. Use BMW 34 4 000 to turn and release the spring retainers. Refit the shoes, expansion lock, adjuster and springs in their illustrated positions.

Check: All retainers are locked and each shoe moves without binding.

Refit and adjust

Reinstall the rear discs and tighten their retaining screws to 16 Nm. Refit the calipers with the applicable torques in the rear brake guide. Set shoe clearance and balance the cables using 34 10 014.

Check: The parking brake holds evenly, releases fully, and the foot pedal is firm.

Repair outcome

Your observations can help the next owner. An outcome report remains owner-reported until reviewed.

BMW E30 Repair Manual

34-17 · 34 41 200 · PDF pages 649, 660, 642

E30 325i with the original rear disc and internal parking-brake shoes.

Source coverage, rights and review status

Owner walkthroughs & comments

Share how the repair went on your car, add a missing detail, or ask a question. Replies stay with the post so the next owner can follow the whole fix.

Loading owner posts…

Owner experience is community advice. Check the vehicle, source and outcome. Sign in to publish, or submit as a guest for review. Photo and video links open on their original sites.