Align the steel sunroof panel
E30 factory sliding and tilting steel sunroof with the guide and gate shown in BMW 54 12 004.
Tools
- Two 4 mm keys for the guide locks, BMW 00 2 102/103 for the adjusters, straightedge, 0.2 mm plastic gauge and low-range torque wrench.
Tightening & service specifications
- Front panel height
- 1 mm below roof
- Rear panel height
- 1 mm above roof
- Front and rear clearance
- About 0.2 mm, even front and rear
- New panel adjuster screws
- 3.5 Nm
BMW catalog parts
- Steel sliding panel · 54 12 1 906 710Inspect the existing panel and contact edges before ordering.