BMW E30 TECHNICAL REFERENCEService manual
Source library
All repair jobs
E30 REPAIR LIBRARY

M20 timing belt replacement

Manual procedure references, original DIY guides and owner experience for this job.

1 linked photo guideWritten stepsBMW manual 11-66a · 11 31 110

Procedures & illustrated guides

M20 timing belt and tensioner

1991 U.S. 325i coupe, M20, rear-wheel drive. Confirm the fitted sprocket profile and matched roller. The M40 procedure is separate.

Use the full M20 procedure for timing and tensioning. Do not move the crank and cam independently with the belt off.

Tools

  • BMW 11 2 150 crankshaft hub holder if the hub is removed. Consult the full procedure before disturbing the hub.
  • 32 mm fan-clutch wrench and pulley holder for the original left-hand coupling.

Tightening & service specifications

M10 camshaft toothed pulley to camshaft
65 NmM20 camshaft pulley only.BMW E30 torque manual · 11-18 · PDF 19
Timing-belt tensioner bolts
16 lb-ft (about 22 Nm)Continental replacement procedure. Tighten in the illustrated order.Continental · M20 timing belt procedure and torque

BMW catalog parts

1991 325i coupe · timing parts diagram

Written repair steps

M20 timing belt and tensioner

1991 U.S. 325i coupe, M20, rear-wheel drive. Confirm the fitted sprocket profile and matched roller. The M40 procedure is separate.

Read the written walkthrough
Photo walkthrough · E30 Zone Wiki

M20 timing belt change

Original text and images remain with the linked creator

Original repair reference with its own instructions and illustrations. Check configuration, safety, specifications and final tests in the applicable manual.

Source coverage: M20 belt drive. Does not apply to M42 or S14 chain drives; confirm belt/tooth profile and tensioner update.

Tools: consult the original guide and manual.

Time: Not indexed; check the full original guide.

Open original guide & pictures

Original publisher/author page indexed; technical procedure not independently certified · 2026-11-09 · Host access or older images may be unavailable.

Original text and photographs stay with their creators. Older guides can contain model-specific details or shortcuts; use the applicable manual for safety, tightening specifications and final checks.

Replacement steps

Before you start

1991 U.S. 325i coupe, M20, rear-wheel drive. Confirm the fitted sprocket profile and matched roller. The M40 procedure is separate.

Estimated time
3–5 hrPlanning estimate for stock hardware in serviceable condition.
Review
Source-based draft · technical review pending

Listed tools & supplies

  • BMW 11 2 150 crankshaft hub holder if the hub is removed. Consult the full procedure before disturbing the hub.
  • 32 mm fan-clutch wrench and pulley holder for the original left-hand coupling.

Check sizes and special fixtures for the installed hardware.

Required parts

  • Matching 127-tooth semicircular belt and tensioner for the late M20B25. Inspect the spring and plunger.

Manual references

11-66a to 11-66b · 11 31 110

Use these page numbers in your copy of the manual.

Process pictures are not indexed for this guide. Use the cited manual’s figures alongside the steps.

Owner walkthroughs & comments

Share how the repair went on your car, add a missing detail, or ask a question. Replies stay with the post so the next owner can follow the whole fix.

Loading owner posts…

Owner experience is community advice. Check the vehicle, source and outcome. Sign in to publish, or submit as a guest for review. Photo and video links open on their original sites.

Suggest a source or add a correction ↗