Read before working
- Work with the key off during disassembly and keep hands clear of the wipers when testing. The pump may pull out of the grommet and spill the tank.
Walkthrough
Isolate a pump fault
Verify fluid level, a free hose and nozzles and the correct fuse. Test the pump command with the applicable wiring diagram. A running pump with no spray calls for a hose, nozzle, pickup or leak check.
Disconnect and drain the front reservoir
With ignition off, release the reservoir fasteners as needed for access. Disconnect the pump and level-switch plugs and label the delivery hose. Empty the reservoir into a catch container before releasing the pump.
Renew the pump seal and reconnect
Pull the pump from its grommet and inspect the tank opening. Fit a good matching grommet and seat the replacement pump squarely. Reconnect the delivery hose, plugs and reservoir fasteners.
Verify both spray and sealing
Add fluid and inspect the grommet for leaks. Operate the washer briefly from the driver’s seat. Check the spray and recheck the tank, hose and pump seal.
Repair outcome
Your observations can help the next owner. An outcome report remains owner-reported until reviewed.
611-7–611-9, Fig. 22 · PDF pages 393, 394, 395
Factory front windshield washer reservoir at the right front of the engine bay. The separate Touring rear and optional headlamp washer pumps use different access or parts.
Source coverage, rights and review statusOwner walkthroughs & comments
Share how the repair went on your car, add a missing detail, or ask a question. Replies stay with the post so the next owner can follow the whole fix.
Loading owner posts…
Owner experience is community advice. Check the vehicle, source and outcome. Sign in to publish, or submit as a guest for review. Photo and video links open on their original sites.