BMW E34 TECHNICAL REFERENCEService manual
Source library
All repair jobs
E34 REPAIR LIBRARY

Starter and solenoid replacement

Manual procedure references, original DIY guides and owner experience for this job.

Manual 121-6

Procedures & illustrated guides

M50 starter terminals

U.S. E34 525i with the original M50 or M50TU.

Disconnect the negative battery cable before working on the starter. Bentley specifies new intake gaskets when removing the M50 intake manifold for access.

Tools

  • Low-range torque wrench covering 5–12 Nm. For standard M5, M6 and M8 hex nuts use 8 mm, 10 mm and 13 mm sockets respectively; identify the fitted nuts first.

Tightening & service specifications

Terminal 30h wire nut
5 Nm
Terminal 50 wire nut
6 Nm
Terminal 30 wire nut
12 NmBentley also lists 8 Nm for the battery positive cable to the starter. Resolve the attachment and starter type before applying either value.

BMW catalog parts

1995 525i sedan · starter diagram

SERVICE MANUAL REFERENCE

Bentley Publishers · Battery, starter and alternator

Printed 121-6 · PDF 168 · section start for starter and solenoid replacement.

Use the complete procedure, figures, tools and specifications in your copy. 525i, 535i, 530i, 540i U.S. source coverage; confirm production date, engine and equipment. The private scan is not displayed here.

Open this manual reference

An illustrated DIY guide hasn’t been linked to this job yet. Use the manual reference, or share an original walkthrough below.

Owner walkthroughs & comments

Share how the repair went on your car, add a missing detail, or ask a question. Replies stay with the post so the next owner can follow the whole fix.

Loading owner posts…

Owner experience is community advice. Check the vehicle, source and outcome. Sign in to publish, or submit as a guest for review. Photo and video links open on their original sites.

Suggest a source or add a correction ↗