BMW E34 TECHNICAL REFERENCEService manual
Source library
All repair jobs
E34 REPAIR LIBRARY

Manual gearbox fluid and application table

Manual procedure references, original DIY guides and owner experience for this job.

Written stepsManual 230-1

Procedures & illustrated guides

Manual gearbox oil

E34 with the original manual gearbox covered by Bentley. Identify the transmission and fluid label before using a specification.

Open the filler first. Match the listed gearbox code and approved fluid to the installed unit.

Tools

  • 17 mm six-point socket for the external-hex plugs on the factory ATF-filled gearboxes described by Bentley. Verify the actual plug head.
  • Filling hose or pump, drain pan, level supported lift and torque wrench.

Tightening & service specifications

Fill and drain plugs
50 NmBentley’s 250 G, 260 G and 310 Z row.Bentley · 230-2, tightening values
Fill and drain plugs
52 NmBentley’s 560 G six-speed row only.Bentley · 230-2, tightening values
SERVICE MANUAL REFERENCE

Bentley Publishers · Manual transmission

Printed 230-1 · PDF 231 · section start for manual gearbox fluid and application table.

Use the complete procedure, figures, tools and specifications in your copy. 525i, 535i, 530i, 540i U.S. source coverage; confirm production date, engine and equipment. The private scan is not displayed here.

Open this manual reference
Written repair steps

Drain and refill a factory manual gearbox

Identify the manual gearbox and fluid label, open the fill plug first, then fill and set the level with the car level.

Read the written walkthrough

An illustrated DIY guide hasn’t been linked to this job yet. Use the manual reference and the written notes, or share an original walkthrough below.

Replacement steps

Before you start

Factory manual boxes in group 230. Fluid designation and torque depend on the observed gearbox and plug. The fluid capacities page lists the source quantities by code.

Estimated time
45–90 minEditorial estimate for an accessible, source-matching installation.
Review
Source-based draft · technical review pending

Listed tools & supplies

  • Verified fluid and plug seals
  • Appropriate plug tools and torque wrench
  • Pump or fill hose
  • Drain pan
  • Level supported lift

Check sizes and special fixtures for the installed hardware.

Manual references

230-1–230-2, Fig. 1

Use these page numbers in your copy of the manual.

Process pictures are not indexed for this guide. Use the cited manual’s figures alongside the steps.

Owner walkthroughs & comments

Share how the repair went on your car, add a missing detail, or ask a question. Replies stay with the post so the next owner can follow the whole fix.

Loading owner posts…

Owner experience is community advice. Check the vehicle, source and outcome. Sign in to publish, or submit as a guest for review. Photo and video links open on their original sites.

Suggest a source or add a correction ↗