Lower control arms and steel-arm bushings
1995 U.S. E34 525i sedan, original rear-wheel-drive front axle. The catalog lists aluminum and steel arms. Only press a separate control arm bushing into a steel arm.
Have the alignment checked after replacing steering or suspension links. Counting turns is only a starting setting.
Tools
- BMW 31 1 110 ball joint separator if the taper needs pressing out.
- BMW 31 1 051 and 33 3 141 / 142 / 144 fittings for an in-car steel bushing press, or a service press with the appropriate adapters on the bench.
Tightening & service specifications
- Control arm ball joint to steering arm
- 93 NmBentley · 310-6, ball joint torque
- Control arm to crossmember
- 78 NmTighten the new self-locking nut at the normal loaded position.Bentley · 310-6, bushing through-bolt torque
BMW catalog parts
- Left aluminum wishbone · 31 12 1 139 987
- Right aluminum wishbone · 31 12 1 139 988
- Left steel wishbone · 31 12 1 139 991
- Right steel wishbone · 31 12 1 139 992
- Steel wishbone bushing · 31 12 1 124 622For the steel arm only; replace both bushings as a pair.