BMW E34 TECHNICAL REFERENCEService manual
Source library
All repair jobs
E34 REPAIR LIBRARY

Plan an M60B30 to M60B40 engine swap

Manual procedure references, original DIY guides and owner experience for this job.

Preparation notes

Procedures & illustrated guides

Preparation for this job

Plan an M60B30 to M60B40 engine swap

Compare an E34 530i recipient to the factory E34 540i package and account for the larger engine’s drivetrain, cooling and management requirements.

Read the notes

An illustrated DIY guide hasn’t been linked to this job yet. Use the manual reference and the written notes, or share an original walkthrough below.

Planning checklist

Before you start

Factory V8 E34 530i recipient and identified M60B40 donor. E34 540i hardware is the comparison set. This guide addresses a V8-to-V8 project. Six-cylinder chassis conversions are a separate engineering job.

Planning time
Several hours of planningEstimate for the checks listed here. Build time depends on the car and donor.
Review
Source-based draft · technical review pending

This is a planning checklist. Complete installation instructions and verified specifications for your exact setup are still required.

Listed tools & supplies

  • 530i and 540i equipment records
  • Donor engine identification and condition report
  • Factory diagrams
  • Hoist and lift plan

Check sizes and special fixtures for the installed hardware.

Manual references

100-1, Table a; 110-12–110-14; 170-9; 200-1–200-2

Use these page numbers in your copy of the manual.

Process pictures are not indexed for this guide. Use the cited manual’s figures alongside the steps.

Owner walkthroughs & comments

Share how the repair went on your car, add a missing detail, or ask a question. Replies stay with the post so the next owner can follow the whole fix.

Loading owner posts…

Owner experience is community advice. Check the vehicle, source and outcome. Sign in to publish, or submit as a guest for review. Photo and video links open on their original sites.

Suggest a source or add a correction ↗