Front hub and wheel bearing
1991 U.S. E30 325i coupe, original rear-wheel-drive front axle. RWD stub axle with a hub and integral bearing. The 325iX bearing is pressed into a different assembly.
Tools
- 36 mm thin-wall six-point socket for the original M24 collar nut (BMW 11 2 180).
- BMW 31 2 101 / 102 / 104 hub puller set and 31 2 120 installer, or the correct equivalents.
- Torque wrench rated for 290 Nm; staking tool for the new nut.
Tightening & service specifications
- New front collar nut to stub axle
- 290 NmStake the new collar nut after tightening. Replace the grease cap.BMW E30 torque manual · 31-6 · PDF 106
BMW catalog parts
- Front hub with ABS provision · 31 21 1 129 576Catalog replacement for 31 21 1 131 297; verify the fitted hub.
- New M24 × 1.5 collar nut · 31 21 1 125 826
- New grease cap · 31 21 1 130 125