M20 timing belt and tensioner
1991 U.S. 325i coupe, M20, rear-wheel drive. Confirm the fitted sprocket profile and matched roller. The M40 procedure is separate.
Use the full M20 procedure for timing and tensioning. Do not move the crank and cam independently with the belt off.
Tools
- BMW 11 2 150 crankshaft hub holder if the hub is removed. Consult the full procedure before disturbing the hub.
- 32 mm fan-clutch wrench and pulley holder for the original left-hand coupling.
Tightening & service specifications
- M10 camshaft toothed pulley to camshaft
- 65 NmM20 camshaft pulley only.BMW E30 torque manual · 11-18 · PDF 19
- Timing-belt tensioner bolts
- 16 lb-ft (about 22 Nm)Continental replacement procedure. Tighten in the illustrated order.Continental · M20 timing belt procedure and torque
BMW catalog parts
- 127-tooth semicircular profile timing belt · 11 31 1 711 081
- Matching adjusting pulley · 11 31 1 711 154BMW catalog specifies use with the listed belt.
- Tensioner spring · 11 31 1 267 746Inspect and renew as needed.
- Tensioner pin · 11 31 1 280 960Inspect and renew as needed.