BMW E30 TECHNICAL REFERENCEService manual
Source library
Repair walkthroughs
WORKSHOP GUIDE / DRIVETRAIN

Getrag 260 manual gearbox oil

1991 U.S. 325i coupe, M20, rear-wheel drive. Identify the original Getrag 260/5 and read the fluid label on the installed case.

IntermediateReplacement steps45–75 minSOURCE-BASED GUIDESource references recorded · technical review pending

Getrag 260 manual gearbox oil

1991 U.S. 325i coupe, M20, rear-wheel drive. Identify the original Getrag 260/5 and read the fluid label on the installed case.

Open the fill plug first. Confirm the gearbox label and approved fluid before draining.

Tools

  • Oil pump or filling hose, drain pan, level supported lift and torque wrench. Match the socket or hex bit to the installed plugs.

Tightening & service specifications

Fill and drain plugs
50 NmBMW table for the original manual gearbox; check replacement plug instructions.BMW E30 torque manual · 23-2 · PDF 71

BMW catalog parts

1991 325i coupe · Getrag 260 housing and plug diagram

Replacement steps

Before you start

1991 U.S. 325i coupe, M20, rear-wheel drive. Identify the original Getrag 260/5 and read the fluid label on the installed case.

Estimated time
45–75 minPlanning estimate for stock hardware in serviceable condition.
Review
Source-based draft · technical review pending

Listed tools & supplies

  • Oil pump or filling hose, drain pan, level supported lift and torque wrench. Match the socket or hex bit to the installed plugs.

Check sizes and special fixtures for the installed hardware.

Required parts

  • Approved fluid identified from the Getrag case label.

Manual references

00 11 229 · Manual transmission oil change

Process pictures are not indexed for this guide. Use the cited manual’s figures alongside the steps.

Read before working

  • Chock the wheels and support the car on rated stands or a lift before removing a wheel. A jack alone is insufficient.
  • Identify the original Getrag 260 and its fluid label before draining. Similar cases may use different fluids.

Walkthrough

Confirm the fluid and access

Check the case label and identify both plugs. Support the car level and confirm the fill plug can be removed.

Check: You have the correct fluid and can refill the gearbox.

Drain the gearbox

Remove the lower plug and collect the old fluid. Clean the magnet, inspect for large debris and refit the original-style drain plug at 50 Nm.

Check: The plug and mating face are clean and the threads are sound.

Refill at the lower edge of the fill opening

With the vehicle level, pump in the approved fluid until it reaches the lower edge of the opening. Seal the original fill plug at 50 Nm and clean the case so a leak is visible.

Check: The fill level is correct and both plugs stay dry.

Repair outcome

Your observations can help the next owner. An outcome report remains owner-reported until reviewed.

BMW E30 Repair Manual

00 11 229 · Manual transmission oil change

1991 U.S. 325i coupe, M20, rear-wheel drive. Identify the original Getrag 260/5 and read the fluid label on the installed case.

Source coverage, rights and review status

Owner walkthroughs & comments

Share how the repair went on your car, add a missing detail, or ask a question. Replies stay with the post so the next owner can follow the whole fix.

Loading owner posts…

Owner experience is community advice. Check the vehicle, source and outcome. Sign in to publish, or submit as a guest for review. Photo and video links open on their original sites.