All repair jobsE30 REPAIR LIBRARY
Getrag 260 manual gearbox oil Manual procedure references, original DIY guides and owner experience for this job.
Written steps
Procedures & illustrated guides Getrag 260 manual gearbox oil 1991 U.S. 325i coupe, M20, rear-wheel drive. Identify the original Getrag 260/5 and read the fluid label on the installed case.
Open the fill plug first. Confirm the gearbox label and approved fluid before draining.
Open guide BMW · 00 11 229, manual gearbox oil change View in Workshop Tools Oil pump or filling hose, drain pan, level supported lift and torque wrench. Match the socket or hex bit to the installed plugs. Tightening & service specifications BMW catalog parts 1991 325i coupe · Getrag 260 housing and plug diagram
Written repair steps Getrag 260 manual gearbox oil 1991 U.S. 325i coupe, M20, rear-wheel drive. Identify the original Getrag 260/5 and read the fluid label on the installed case.
Read the written walkthrough An illustrated DIY guide hasn’t been linked to this job yet. Use the manual reference and the written notes, or share an original walkthrough below.
Replacement steps Before you start 1991 U.S. 325i coupe, M20, rear-wheel drive. Identify the original Getrag 260/5 and read the fluid label on the installed case.
Estimated time 45–75 minPlanning estimate for stock hardware in serviceable condition. Review Source-based draft · technical review pending Listed tools & supplies Oil pump or filling hose, drain pan, level supported lift and torque wrench. Match the socket or hex bit to the installed plugs. Check sizes and special fixtures for the installed hardware.
Required parts Approved fluid identified from the Getrag case label. Manual references 00 11 229 · Manual transmission oil change
Process pictures are not indexed for this guide. Use the cited manual’s figures alongside the steps.
Suggest a source or add a correction ↗