M20 oil and filter service
1991 U.S. 325i coupe, M20, rear-wheel drive. Check the sump and the spin-on filter installed on the car.
BMW’s two references disagree on the sump plug. Confirm the applicable specification for your sump and plug before starting.
Tools
- 17 mm six-point socket for the original BMW 11 13 1 273 093 drain plug; check the head on a replacement.
- Strap wrench for filter removal; MANN W 719/15 is 76 mm outside diameter.
Tightening & service specifications
- Spin-on filter
- Hand-tighten per the filter instructionsUse the filter maker’s seal-contact and turn instructions.
- Oil fill with new filter
- 4.25 LUse the dipstick for final level.BMW 325i / 325is handbook · p. 84 (PDF 85)
- M12 × 1.5 sump plug
- Check the specification for the fitted sumpThe archived torque manual lists 35 Nm; the later BMW TIS table lists 25 Nm. Confirm which applies before tightening.BMW E30 torque manual · 11-10 · PDF 11
BMW catalog parts
- Spin-on oil filter · 11 42 1 707 779
- Copper drain seal, A12 × 17 · 07 11 9 963 151
- Original M12 × 1.5 drain plug · 11 13 1 273 093Catalog replacement 11 13 7 535 106; verify the head size on the part.