BMW E30 TECHNICAL REFERENCEService manual
Source library
All repair jobs
E30 REPAIR LIBRARY

Driveshaft flexible coupling replacement

Manual procedure references, original DIY guides and owner experience for this job.

Written stepsBMW manual 26-6 · joint disc

Procedures & illustrated guides

Replace the driveshaft flex disc

Late rear-wheel-drive E30 325i with the original M20B25 and Getrag 260. Match the flange diameter and bolt grade before choosing hardware.

Tools

  • BMW 26 1 040 for the sliding ring; socket and counterhold for fitted flange bolts. Use 17 mm for standard M10 hex heads when fitted and verify the actual tool fit.
  • Rated exhaust and shaft supports, torque wrench, and a ruler for 4–6 mm preload.

Tightening & service specifications

M10 class 8.8 coupling hardware
48 NmBMW E30 torque manual · 26-1 · PDF 98
M10 class 10.9 coupling hardware
64 NmBMW E30 torque manual · 26-1 · PDF 98
RWD sliding clamp ring
10 NmBMW E30 torque manual · 26-1 · PDF 98

BMW catalog parts

1991 325i coupe · driveshaft and flex disc diagram

Written repair steps

Replace the driveshaft flex disc

Late rear-wheel-drive E30 325i with the original M20B25 and Getrag 260. Match the flange diameter and bolt grade before choosing hardware.

Read the written walkthrough

An illustrated DIY guide hasn’t been linked to this job yet. Use the manual reference and the written notes, or share an original walkthrough below.

Replacement steps

Before you start

Late rear-wheel-drive E30 325i with the original M20B25 and Getrag 260. Match the flange diameter and bolt grade before choosing hardware.

Estimated time
2–4 hrPlanning estimate for stock hardware in serviceable condition.
Review
Source-based draft · technical review pending

Listed tools & supplies

  • BMW 26 1 040 for the sliding ring; socket and counterhold for fitted flange bolts. Use 17 mm for standard M10 hex heads when fitted and verify the actual tool fit.
  • Rated exhaust and shaft supports, torque wrench, and a ruler for 4–6 mm preload.

Check sizes and special fixtures for the installed hardware.

Required parts

  • Flex disc for the fitted flange, matching bolts and new self-locking nuts.

Manual references

26-6 · 26 11 051

Use these page numbers in your copy of the manual.

Process pictures are not indexed for this guide. Use the cited manual’s figures alongside the steps.

Owner walkthroughs & comments

Share how the repair went on your car, add a missing detail, or ask a question. Replies stay with the post so the next owner can follow the whole fix.

Loading owner posts…

Owner experience is community advice. Check the vehicle, source and outcome. Sign in to publish, or submit as a guest for review. Photo and video links open on their original sites.

Suggest a source or add a correction ↗