BMW E30 TECHNICAL REFERENCEService manual
Source library
All repair jobs
E30 REPAIR LIBRARY

Front brake pad and disc replacement

Manual procedure references, original DIY guides and owner experience for this job.

1 linked discussionWritten stepsBMW manual 34-4 to 34-5 · 34 11 000 / 220

Procedures & illustrated guides

Front brake pads and discs

1991 U.S. 325i coupe, M20, rear-wheel drive. Factory ventilated front discs and matching sliding calipers; iX hardware differs.

Tools

  • Counterhold wrench on the guide pin. Check the hex on the fitted caliper.
  • Disc micrometer, caliper hanger, rated stands and torque wrench.

Tightening & service specifications

Front disc retaining screw
16 NmBMW E30 torque manual · 34-1 · PDF 136
Front caliper carrier to steering knuckle
123 NmRear-wheel-drive E30 row; BMW specifies lightly oiled bolt threads.BMW E30 torque manual · 34-1 · PDF 136
Front guide-pin bolts
35 NmRenew the bolts for this E30 design.BMW E30 torque manual · 34-1 · PDF 136

BMW catalog parts

1991 325i coupe · front disc diagram

BMW E30 factory repair manual

34-4 to 34-5 · 34 11 000 / 220 · PDF pages 643–644

Open BMW-E30-Repair-Manual.pdf in the workshop archive to see the factory illustrations, tools and full procedure.

Written repair steps

Front brake pads and discs

1991 U.S. 325i coupe, M20, rear-wheel drive. Factory ventilated front discs and matching sliding calipers; iX hardware differs.

Read the written walkthrough
Repair reference · E30 Zone Wiki

E30 brake system and repair references

Original text and images remain with the linked creator

Original repair reference with its own instructions and illustrations. Check configuration, safety, specifications and final tests in the applicable manual.

Source coverage: E30 source. Confirm the exact engine, axle, body, build and installed equipment; M3 and iX can differ.

Tools: consult the original guide and manual.

Time: Not indexed; check the full original guide.

Open original discussion

Original publisher/author page indexed; technical procedure not independently certified · 2026-11-09 · Host access or older images may be unavailable.

Original text and photographs stay with their creators. Older guides can contain model-specific details or shortcuts; use the applicable manual for safety, tightening specifications and final checks.

Replacement steps

Before you start

1991 U.S. 325i coupe, M20, rear-wheel drive. Factory ventilated front discs and matching sliding calipers; iX hardware differs.

Estimated time
1–2 hr per axlePlanning estimate for stock hardware in serviceable condition.
Review
Source-based draft · technical review pending

Listed tools & supplies

  • Counterhold wrench on the guide pin. Check the hex on the fitted caliper.
  • Disc micrometer, caliper hanger, rated stands and torque wrench.

Check sizes and special fixtures for the installed hardware.

Required parts

  • Matched front pad set and new guide-pin bolts.
  • Two matching discs if the discs are being replaced.

Manual references

34-4 to 34-5 · front pads and discs

Use these page numbers in your copy of the manual.

Process pictures are not indexed for this guide. Use the cited manual’s figures alongside the steps.

Owner walkthroughs & comments

Share how the repair went on your car, add a missing detail, or ask a question. Replies stay with the post so the next owner can follow the whole fix.

Loading owner posts…

Owner experience is community advice. Check the vehicle, source and outcome. Sign in to publish, or submit as a guest for review. Photo and video links open on their original sites.

Suggest a source or add a correction ↗