BMW E30 TECHNICAL REFERENCEService manual
Source library
All repair jobs
E30 REPAIR LIBRARY

Rear brake pad and disc replacement

Manual procedure references, original DIY guides and owner experience for this job.

1 linked photo guideWritten stepsBMW manual 34-8 to 34-9 · 34 21 200 / 320

Procedures & illustrated guides

Rear brake pads and discs

1991 U.S. 325i coupe, M20, rear-wheel drive. Factory rear discs and the capped guide bolts in BMW’s illustration.

Tools

  • 7 mm hex bit for the factory rear guide bolts.
  • Disc micrometer, caliper hanger, rated stands and torque wrench.

Tightening & service specifications

Rear disc retaining screw
16 NmBMW E30 torque manual · 34-2 · PDF 137
Rear caliper carrier to trailing arm
67 NmBMW E30 torque manual · 34-2 · PDF 137
Original 7 mm hex rear guide bolts
30 Nm, −5 Nm toleranceBMW E30 torque manual · 34-2 · PDF 137

BMW catalog parts

1991 325i coupe · rear brake diagram

BMW E30 factory repair manual

34-8 to 34-9 · 34 21 200 / 320 · PDF pages 647–649

Open BMW-E30-Repair-Manual.pdf in the workshop archive to see the factory illustrations, tools and full procedure.

Written repair steps

Rear brake pads and discs

1991 U.S. 325i coupe, M20, rear-wheel drive. Factory rear discs and the capped guide bolts in BMW’s illustration.

Read the written walkthrough
Photo walkthrough · FCP Euro

E30 rear brake pads and rotors

Original text and images remain with the linked creator

Original repair reference with its own instructions and illustrations. Check configuration, safety, specifications and final tests in the applicable manual.

Source coverage: Disc-brake E30 applications listed by the publisher; its parts list separates the 325iX rear rotor. Not a rear-drum procedure.

Source tool list: 5 mm and 7 mm hex sockets · 17 mm socket · Ratchet and breaker bar · Caliper piston tool. Check the full list in the guide.

Time: Publisher estimate: about 1 hour; corrosion can increase the time.

Open original guide & pictures

Original publisher/author page indexed; technical procedure not independently certified · 2026-11-09 · Host access or older images may be unavailable.

Original text and photographs stay with their creators. Older guides can contain model-specific details or shortcuts; use the applicable manual for safety, tightening specifications and final checks.

Replacement steps

Before you start

1991 U.S. 325i coupe, M20, rear-wheel drive. Factory rear discs and the capped guide bolts in BMW’s illustration.

Estimated time
1–2 hr per axlePlanning estimate for stock hardware in serviceable condition.
Review
Source-based draft · technical review pending

Listed tools & supplies

  • 7 mm hex bit for the factory rear guide bolts.
  • Disc micrometer, caliper hanger, rated stands and torque wrench.

Check sizes and special fixtures for the installed hardware.

Required parts

  • Matched rear pad set.
  • Two matching discs if the discs are being replaced.

Manual references

34-8 to 34-9 · rear pads and discs

Use these page numbers in your copy of the manual.

Process pictures are not indexed for this guide. Use the cited manual’s figures alongside the steps.

Owner walkthroughs & comments

Share how the repair went on your car, add a missing detail, or ask a question. Replies stay with the post so the next owner can follow the whole fix.

Loading owner posts…

Owner experience is community advice. Check the vehicle, source and outcome. Sign in to publish, or submit as a guest for review. Photo and video links open on their original sites.

Suggest a source or add a correction ↗