BMW E30 TECHNICAL REFERENCEService manual
Source library
All repair jobs
E30 REPAIR LIBRARY

Radiator removal and installation

Manual procedure references, original DIY guides and owner experience for this job.

Written stepsBMW manual 17-7 to 17-7/1 · 17 11 000

Procedures & illustrated guides

Replace the late M20 manual radiator

Late rear-wheel-drive E30 325i with the original M20B25 and manual transmission. Check A/C equipment before matching the radiator and thermoswitch.

Tools

  • 10 mm socket for an original M6 hex-head mount. Use the drive profile supplied with the actual drain plug.
  • Low-range torque wrench covering 2.5–10 Nm, clamp driver, catch pan and gloves.

Tightening & service specifications

Radiator mount screw, M6
10 NmBMW E30 torque manual · 17-2 · PDF 62
Original-type radiator drain plug
2.5 NmBMW E30 torque manual · 17-2 · PDF 62
Original 32–48 mm coolant hose clamps
2.5 NmBMW E30 torque manual · 17-1 · PDF 61

BMW catalog parts

1991 325i coupe · radiator and supports diagram

BMW E30 factory repair manual

17-7 to 17-7/1 · 17 11 000 · PDF pages 333–334

Open BMW-E30-Repair-Manual.pdf in the workshop archive to see the factory illustrations, tools and full procedure.

Written repair steps

Replace the late M20 manual radiator

Late rear-wheel-drive E30 325i with the original M20B25 and manual transmission. Check A/C equipment before matching the radiator and thermoswitch.

Read the written walkthrough

An illustrated DIY guide hasn’t been linked to this job yet. Use the manual reference and the written notes, or share an original walkthrough below.

Replacement steps

Before you start

Late rear-wheel-drive E30 325i with the original M20B25 and manual transmission. Check A/C equipment before matching the radiator and thermoswitch.

Estimated time
1–2 hr plus cool-downPlanning estimate for stock hardware in serviceable condition.
Review
Source-based draft · technical review pending

Listed tools & supplies

  • 10 mm socket for an original M6 hex-head mount. Use the drive profile supplied with the actual drain plug.
  • Low-range torque wrench covering 2.5–10 Nm, clamp driver, catch pan and gloves.

Check sizes and special fixtures for the installed hardware.

Required parts

  • Radiator for the late manual 325i, approved coolant and any failed mounts or hose clamps.

Manual references

17-7 to 17-7/1 · 17 11 000

Use these page numbers in your copy of the manual.

Process pictures are not indexed for this guide. Use the cited manual’s figures alongside the steps.

Owner walkthroughs & comments

Share how the repair went on your car, add a missing detail, or ask a question. Replies stay with the post so the next owner can follow the whole fix.

Loading owner posts…

Owner experience is community advice. Check the vehicle, source and outcome. Sign in to publish, or submit as a guest for review. Photo and video links open on their original sites.

Suggest a source or add a correction ↗