Read before working
- Check when the tires are cold. Use the vehicle’s cold pressure for the applicable axle and load, within the tire’s limits.
- Do not bleed a hot tire down to the cold target. A visibly damaged tire or one that will not hold pressure needs inspection before driving.
Inspection steps
Read the correct placard row
Compare the front and rear tire sizes with the driver-door pillar placard or matching owner’s manual. Choose the load condition that applies and record both axle targets in the units shown.
Measure before adding air
Wait at least three hours after driving for a cold reading. Remove each valve cap and seat the gauge squarely until the reading stabilizes. Record the four readings by wheel position and note any one tire substantially lower than the rest.
Set each tire and recheck it
Adjust in short increments to the appropriate axle target, rechecking with the same gauge. Refit the valve caps. If the car has a serviceable spare, check it separately against its own specified pressure.
Follow up on repeat loss
Save the date, ambient conditions and readings. If one tire repeatedly loses more pressure than the others, have the tire, valve and wheel inspected for leakage. A pressure adjustment does not repair a puncture or damaged sidewall.
Record your findings
Keep observations and unresolved questions in your private journal before deciding on a repair.
Add to My garage ↗020-16, tire inflation · PDF pages 38
Factory tire sizes and load combinations listed for the actual vehicle. For a non-listed tire size, confirm the correct cold settings for the installed combination before adjusting.
Source coverage, rights and review statusOwner walkthroughs & comments
Share how the repair went on your car, add a missing detail, or ask a question. Replies stay with the post so the next owner can follow the whole fix.
Loading owner posts…
Owner experience is community advice. Check the vehicle, source and outcome. Sign in to publish, or submit as a guest for review. Photo and video links open on their original sites.