Read before working
- Stop for a scored bore, damaged piston groove or splines, or binding after sizing. Protect precision surfaces during seal removal.
- Use the factory timing procedure to reinstall the unit and verify timing before cranking.
Walkthrough
Drain and open the actuator
Drain residual engine oil into a pan and place the actuator on a clean, padded bench. Remove the cylinder cover fasteners and withdraw the cover with the shaft and piston supported. Inspect the cylinder and piston for marks, play and wear.
Remove both parts of the old seal
Lift or carefully section the old outer ring and remove the underlying elastomer ring. Keep the blade off the groove and piston. Wipe the groove and inspect it in good light.
Fit the energizer and outer ring
Seat the elastomer ring flat and untwisted. Condition the outer ring only as directed by the kit maker, then stretch it evenly just enough to seat above the inner ring. Lubricate the piston, bore and chamfer with clean oil as specified.
Size the outer ring and confirm smooth movement
Use the seal maker’s sizing sequence. For the cited Beisan kit, ease the piston into the lubricated cylinder at an angle and square it gradually. Back out and reposition if the ring catches. Let it size in the bore for the supplier’s dwell time before removal and inspection.
Close, reinstall and measure travel
Refit the cover using the kit and unit’s specified hardware, gasket and torque. Reinstall with the factory locking and indexing procedure, prove timing by hand and check the oil feed. Repeat the actuator travel test if operation is uncertain.
Repair outcome
Your observations can help the next owner. An outcome report remains owner-reported until reviewed.
117-18–117-20, actuator removal and installation · PDF pages 138, 139, 140
M50TU single-VANOS actuator already removed using the correct timing fixtures. Confirm the installed part number and seal kit. Bentley covers unit removal and refitting. Beisan documents this internal seal repair.
Source coverage, rights and review statusOwner walkthroughs & comments
Share how the repair went on your car, add a missing detail, or ask a question. Replies stay with the post so the next owner can follow the whole fix.
Loading owner posts…
Owner experience is community advice. Check the vehicle, source and outcome. Sign in to publish, or submit as a guest for review. Photo and video links open on their original sites.