Use this source with your vehicle record
U.S. models: 525i 1989-1995; 535i 1989-1993; 530i and 540i 1994-1995. Applicability within each chapter still varies.
Match the installed engine, production period and relevant equipment before using a source procedure. The links below connect the chapter to current reference content and member experience.
Jobs in this chapter
Open each repair job for linked DIY guides, owner walkthroughs and comments. The locator points to the start of the topic in your service manual.
- Brake troubleshooting340-1 · PDF p. 317Guides & owner fixes
- Brake bleeding and equipment limits340-2 · PDF p. 318Guides & owner fixes
- Pads, rotors and caliper types340-3 · PDF p. 319Guides & owner fixes
- Brake pad replacement340-4 · PDF p. 320Guides & owner fixes
- Caliper removal340-5 · PDF p. 321Guides & owner fixes
- Rotor removal and runout checks340-6 · PDF p. 322Guides & owner fixes
- Brake master cylinder and booster340-8 · PDF p. 324Guides & owner fixes
- Brake pedal and parking brake adjustment340-10 · PDF p. 326Guides & owner fixes
- Parking brake shoes340-11 · PDF p. 327Guides & owner fixes
- Parking cable, ABS sensor and diagnosis340-12 · PDF p. 328Guides & owner fixes
Walkthroughs from these pages
All walkthroughs ↗Measure brake pad and rotor wear
Check inner and outer pads and compare rotor measurements with the stamped or verified limit for the installed brakes.
020-16; 340-3–340-7, Table b · inspection · source-based guideReplace brake pads on factory sliding calipers
Replace pads as an axle set on the illustrated two-guide-bolt calipers, inspect the piston and rotor, and verify a firm pedal before moving.
010-3–010-4; 340-4–340-5, Figs. 2–6 · replacement · source-based guideDrawings and component references
Chapter discussions
No discussions linked to this chapter yet. Ask with the car’s configuration and exact source page so other owners can follow the same reference.