Front control arm replacement
1991 U.S. E30 325i coupe, original rear-wheel-drive front axle. Factory steel wishbones; use the separate procedure for the 325iX or M3.
Have the alignment checked after replacing steering or suspension links. Counting turns is only a starting setting.
Tools
- BMW 31 1 110 ball joint separator for the standard strut.
- Torque wrench covering 42–85 Nm. Use the socket that fully fits each replacement nut.
Tightening & service specifications
- Inner ball joint to front axle carrier
- 85 NmBMW E30 torque manual · 31-3 · PDF 104
- Outer ball joint to spring strut
- 65 NmKeep the taper and bore clean and free of grease. Install the locking hardware specified for each joint.BMW E30 torque manual · 31-3 · PDF 104
- Control arm bushing bracket to carrier
- 42 NmBMW E30 torque manual · 31-4 · PDF 105
BMW catalog parts
- Left steel wishbone · 31 12 1 127 725
- Right steel wishbone · 31 12 1 127 726
- M14 × 1.5 self-locking nut · 31 10 6 774 714Match to the inner joint and check the repair manual’s hardware note.
- M12 × 1.5 self-locking nut · 32 21 6 769 539Match to the outer joint.