Front strut, upper mount and damper
1991 U.S. E30 325i coupe, original rear-wheel-drive front axle. Check the damper and upper mount type before applying shaft torque.
Support the strut and use a spring compressor that fits the spring. Never loosen the center nut while the spring is loaded.
Tools
- BMW 31 3 111 spring compressor with the fitting shown, and 31 3 170 shaft-nut tool with a counterhold.
- BMW 31 3 150 or 31 3 180 retaining-ring tool, according to the installed collar.
Tightening & service specifications
- Upper mount to body
- 22 NmReplace the self-locking nuts.BMW E30 torque manual · 31-7 · PDF 107
- Damper shaft nut, original M12 external hex shaft
- 64 NmBMW E30 torque manual · 31-7 · PDF 107
- Damper shaft nut, original M12 internal hex shaft
- 44 NmBMW E30 torque manual · 31-7 · PDF 107
- Original damper retaining collar
- 130 NmCheck replacement damper instructions if the supplied ring differs.BMW E30 torque manual · 31-8 · PDF 108
BMW catalog parts
- Standard guide support · 31 33 1 139 452Check upper mount and alignment before choosing standard or correction mount.
- Camber correction guide support · 31 33 1 139 484Only when the specified correction is needed.