Rear shocks and upper mounts
1991 U.S. 325i coupe, M20, rear-wheel drive. Conventional rear shocks, without ride-height control.
The later BMW TIS table gives 77 Nm in its E30 row. Confirm which table and bolt grade apply before tightening the lower mount at normal ride height.
Tools
- Support jack for the trailing arm and rated stands.
- Piston-rod counterhold for the fitted shock; size depends on the shaft.
Tightening & service specifications
- Upper mount to body
- 22 NmM8 fasteners.BMW E30 torque manual · 33-17 · PDF 134
- Original shock piston rod to upper mount
- 15 NmFor factory hardware. Use the maker’s value for a replacement shock.BMW E30 torque manual · 33-17 · PDF 134
- Lower mount, E30 standard bolt row
- 87 NmFactory archive, at normal ride height. Verify bolt grade and the table for the installed hardware first.BMW E30 torque manual · 33-17 · PDF 134
- Lower mount, E30 10.9 bolt row
- 130 NmFactory archive, when the bolt is marked 10.9. Check the installed shock and applicable BMW edition.BMW E30 torque manual · 33-17 · PDF 134