Steering tie rod and outer end
1991 U.S. E30 325i coupe, original rear-wheel-drive front axle. Rack-and-pinion steering. Match the fitted lock plate and the steering damper arrangement.
Have the alignment checked after replacing steering or suspension links. Counting turns is only a starting setting.
Tools
- BMW 32 2 070 separator for the outer joint.
- BMW 32 2 100 for the standard inner joint, or 32 2 110 for the steering-damper version shown. Use pliers on the lock plate.
Tightening & service specifications
- Inner tie rod to rack
- 75 NmUse a new securing plate. Follow the lock plate procedure; do not hammer it.BMW E30 torque manual · 32-5 · PDF 117
- Outer tie rod stud to steering arm
- 36.5 ± 3.5 NmUse the correct locknut or original castle nut and cotter pin design.BMW E30 torque manual · 32-5 · PDF 117
- Tie rod adjuster clamp bolt
- 14 NmFor the clamp bolt shown, at normal load after setting toe.BMW E30 torque manual · 32-5 · PDF 117
BMW catalog parts
- Complete tie rod (either side) · 32 11 1 126 360Replacement for catalog number 32 11 1 125 186.
- Outer ball joint · 32 11 1 126 757
- Inner joint securing plate · 32 11 1 124 540
- Rack boot · 32 11 1 127 104Inspect for cracks and renew if damaged.