Read before working
- Engine off, key out and engine cool. Keep hands and tools clear of fans, belts and pinch points.
- This check is visual. Releasing a tensioner or turning the engine to expose the rest of a belt requires its own procedure.
Inspection steps
Separate the accessory belts from the timing drive
Tools: Flashlight · Camera
Manual 020-12 to 020-13 ↗Identify the visible belts driving accessories at the front of the engine. Note the narrow V-profile or multiple small ribs, and count the visible belts. The M20 camshaft belt under its cover is outside this inspection.
Inspect each accessible span
Tools: Flashlight · Inspection mirror · Camera
Manual 020-13 ↗Use a light and mirror to inspect the visible faces and edges. Look for polished contact surfaces, cracks, loose strands, separated layers, missing ribs or wet oil. Record which surfaces you could see and which remained hidden.
Check rib wear on a modern replacement belt
Tools: Compatible rib-wear gauge, for an accessible poly-ribbed belt
Manual 020-13 ↗EPDM poly-ribbed belts can lose material without obvious cracking. Where the ribs are safely accessible with the engine off, use a compatible belt-wear gauge exactly as its maker instructs. Do not release the tensioner, turn the engine or force access as part of this check. If the belt cannot be measured safely, record that limitation and arrange the proper access procedure.
Check belt seating and nearby traces
Tools: Flashlight · Inspection mirror
Manual 020-13 ↗Look for a belt riding at an angle, on a pulley edge or outside its expected grooves. If there is fluid on the belt, look for traces above or beside it from a safe position. Note a reported squeal separately from the visible condition.
Decide what needs further work
Tools: Camera
Manual 020-13 ↗A torn, displaced or contaminated belt needs assessment before the engine is run again. Establish the correct routing, belt and tensioning hardware before replacement, and address the source of contamination. Do not use belt dressing to mask a squeal.
Record your findings
Keep observations and unresolved questions in your private journal before deciding on a repair.
Add to My garage ↗020-12 to 020-13, Figs. 9–11 · PDF pages 34, 35
Factory accessory drives on the covered U.S. E34 engines. Bentley groups M20/M30 V-belts separately from M50/M60 poly-ribbed belts. Verify the actual tensioner and routing before any replacement.
Source coverage, rights and review statusOwner walkthroughs & comments
Share how the repair went on your car, add a missing detail, or ask a question. Replies stay with the post so the next owner can follow the whole fix.
Loading owner posts…
Owner experience is community advice. Check the vehicle, source and outcome. Sign in to publish, or submit as a guest for review. Photo and video links open on their original sites.