Use this source with your vehicle record
U.S. models: 525i 1989-1995; 535i 1989-1993; 530i and 540i 1994-1995. Applicability within each chapter still varies.
Match the installed engine, production period and relevant equipment before using a source procedure. The links below connect the chapter to current reference content and member experience.
Jobs in this chapter
Open each repair job for linked DIY guides, owner walkthroughs and comments. The locator points to the start of the topic in your service manual.
- Manual gearbox fluid and application table230-1 · PDF p. 231Guides & owner fixes
- Output seal with gearbox installed230-2 · PDF p. 232Guides & owner fixes
- Selector shaft seal230-3 · PDF p. 233Guides & owner fixes
- Input seal and reverse lamp switch230-4 · PDF p. 234Guides & owner fixes
- Manual gearbox removal and installation230-5 · PDF p. 235Guides & owner fixes
Walkthroughs from these pages
All walkthroughs ↗Identify an E34 gearbox from its tag
Read the case tag and match the full gearbox code to factory application, fluid and repair information.
200-1–200-2; 230-1; 240-1 · reference · source-based guideDrain and refill a factory manual gearbox
Identify the manual gearbox and fluid label, open the fill plug first, then fill and set the level with the car level.
230-1–230-2, Fig. 1 · replacement · source-based guideReplace the clutch with the manual gearbox removed
Inspect the flywheel and release hardware, center the new disc and install the matched clutch before refitting the transmission.
210-4–210-6; 230-5–230-6 · replacement · source-based guidePlan an E34 525i five-speed manual swap
Select a matched manual driveline for an automatic M50/M50TU 525i, then work through pedals, hydraulics, wiring and commissioning.
200-2, Table b; 210-2–210-5; 230-5; 240-5–240-11; 250-2; 260-4–260-7 · build planning · source-based guidePlan an E34 540i six-speed conversion
Build a donor checklist around the E34 540i S6S 560G and verify clutch, shaft, differential and chassis-side interfaces.
200-1–200-2, Tables a–b; 210; 230-5; 240-9–240-11; 260-4 · build planning · source-based guideDrawings and component references
Use the OEM catalog to find an assembly under an independent source vehicle selection. Chapter membership does not establish a part’s fitment.
Browse illustrated OEM catalogChapter discussions
No discussions linked to this chapter yet. Ask with the car’s configuration and exact source page so other owners can follow the same reference.