BMW 325i
325i
BMW 325i · manufacturer reference
BMW 325i · manufacturer reference
BMW 325i · manufacturer reference
BMW 325i · manufacturer reference
Engine-family taxonomy only. Manufacturer archive pages may contain AI-assisted text, inconsistent dates or other conflicts; exact production, option and fitment claims require separate evidence.
Connected knowledge
Identify an E30 configuration before ordering parts
E30 identification only. A model badge is not proof of an installed engine, factory equipment or part compatibility.
E30 cold cooling-system visual inspection
E30 visual inspection. Pump, expansion tank, hoses and thermostat differ by engine/build; no removal, pressure test or hot-system work is included.
Inspect the driveshaft center support
Rear-wheel-drive E30 325i with the illustrated two-piece shaft. Confirm flange, bearing and bracket details from your build. The iX and M3 need their own catalog and procedure checks.
Replace a rear lamp bulb
Late E30 325i coupe with the 1988-on rear lamp carrier. Check the actual lamp, build date and bulb markings. The early body, M3 and some convertibles use different assemblies.
M20 oil and filter change preparation
US 325i / 325is M20 handbook figures. Identify the installed sump and filter, especially on a swapped engine.
Replace the M20 engine air filter
1991 325i M20 with the stock clip-fastened airbox. Check that the lid and filter match the catalog before opening.
Remove or install a wheel
U.S. E30 325i / 325is, stock wheel and bolts described in the owner’s handbook.
Front brake pads and discs
1991 U.S. 325i coupe, M20, rear-wheel drive. Factory ventilated front discs and matching sliding calipers; iX hardware differs.
Rear brake pads and discs
1991 U.S. 325i coupe, M20, rear-wheel drive. Factory rear discs and the capped guide bolts in BMW’s illustration.
Brake fluid flush and bleeding
1991 U.S. 325i coupe, M20, rear-wheel drive. Factory hydraulic brakes. Use the procedure for the installed ABS or non-ABS system.
Front control arm replacement
1991 U.S. E30 325i coupe, original rear-wheel-drive front axle. Factory steel wishbones; use the separate procedure for the 325iX or M3.
Steering tie rod and outer end
1991 U.S. E30 325i coupe, original rear-wheel-drive front axle. Rack-and-pinion steering. Match the fitted lock plate and the steering damper arrangement.
Front hub and wheel bearing
1991 U.S. E30 325i coupe, original rear-wheel-drive front axle. RWD stub axle with a hub and integral bearing. The 325iX bearing is pressed into a different assembly.
Front strut, upper mount and damper
1991 U.S. E30 325i coupe, original rear-wheel-drive front axle. Check the damper and upper mount type before applying shaft torque.
M20 spark plugs
E30 325i with the original M20 and factory-type M14 × 1.25 plugs. Install six of the same type.
M20 alternator terminals
1991 U.S. 325i coupe, M20, rear-wheel drive.
Getrag 260 manual gearbox oil
1991 U.S. 325i coupe, M20, rear-wheel drive. Identify the original Getrag 260/5 and read the fluid label on the installed case.
ZF 4HP22 transmission pan and fluid
1991 U.S. 325i coupe, M20, rear-wheel drive. ZF 4HP22 with the original dipstick, drain plug and steel pan. Read the gearbox plate and fluid recommendation first.
M20 starter terminals
1991 U.S. 325i coupe, M20, rear-wheel drive.
Front wishbone bushings
1991 U.S. E30 325i coupe, original rear-wheel-drive front axle. Use matching left and right bushings and keep their installation marks aligned.
Front anti-roll bar, links and mounts
1991 U.S. E30 325i coupe, original rear-wheel-drive front axle. Link mounts to the control arm; use different specs for an iX or M3 strut-mounted design.
Fill and bleed the M20 cooling system
Late rear-wheel-drive E30 325i with the original M20B25 and its separate expansion tank.
Replace the late M20 manual radiator
Late rear-wheel-drive E30 325i with the original M20B25 and manual transmission. Check A/C equipment before matching the radiator and thermoswitch.
Replace the late M20 expansion tank
Late rear-wheel-drive E30 325i with the original M20B25 and clip-mounted tank from 09/1987.
M20 timing belt and tensioner
1991 U.S. 325i coupe, M20, rear-wheel drive. Confirm the fitted sprocket profile and matched roller. The M40 procedure is separate.
Bleed the clutch hydraulics
Late rear-wheel-drive E30 325i with the original M20B25 and hydraulic clutch on the manual transmission.
Replace the driveshaft flex disc
Late rear-wheel-drive E30 325i with the original M20B25 and Getrag 260. Match the flange diameter and bolt grade before choosing hardware.
Rear shocks and upper mounts
1991 U.S. 325i coupe, M20, rear-wheel drive. Conventional rear shocks, without ride-height control.
Adjust the rear-disc parking brake
Rear-wheel-drive E30 with the separate shoes inside the rear rotor hats. Rear drum versions use their own adjustment.
Replace the rear-disc parking brake shoes
E30 325i with the original rear disc and internal parking-brake shoes.
Align the steel sunroof panel
E30 factory sliding and tilting steel sunroof with the guide and gate shown in BMW 54 12 004.
Replace the heater blower motor
E30 cowl-access blower shown in BMW 64 11 210. Match the motor code and housing before buying.
Replace the heater blower resistor
E30 cowl-access resistor plate shown in BMW 64 11 220. Check its connector and fitted housing.
Replace the heater water valve
Left-hand-drive E30 325i with the valve and pipe joints shown in BMW 64 11 271.
Replace the heater core
Left-hand-drive E30 325i with the heater case and footwell pipe routing in BMW 64 11 531.
Replace the power-mirror switch
E30 with the door-mounted selector and adjustment switch shown in BMW 61 31 255.
Replace a sealed-beam headlight insert
U.S. E30 325i with four sealed-beam lamps, the late arrangement cataloged from 06/1989.
Replace a late front fog light bulb
Late E30 with the 09/1987-on front housing that accepts the H3 bulb.
Replace the front wiper blades
E30 325i with original spring-latch front wiper arms. Match any replacement arm’s latch.
Fill and bleed the power steering
E30 with the hydraulic rack and dipstick-equipped reservoir in BMW 32 13 006.